Things that need doing before dragging the boat to the scapper:
- Torque left trailer wheel bolts, check right ones
- Check pressure & fill tires, 70psi
- Pack grease into left & right hubs (or probs do a full repack since we dont need to burn up another fucking bearing; as matthew said, left hub is not movingfreely; likey due to gerease just getting hard?, likey will free up once it runs for a bit.
- remove plastic strip from transom lower right side, if easy
- spray hith mechanism with white lithium | silcone spray | wd-40?
- test lights
items needed:
- silcone spray, wd-40, white litium spray grease
- large cardboard
- coveralls
- gloves (nitril black | blue ones? test is ) or yellow dishwashing gloves? good news everybody!
i can get 2 blue one on my right hand, so nothing else needed. - torque wrench; since this will be the last time i need to torque a nut sell the 2 that i have.
Triple M is only 8 mins away, but last thing we need is a blown tire or burned up bearing.
and as usual, i found a problem with the google map and earth.google link is wrong; i should tell them….
and of course i had to write something about how the blog is the best way for this,
