2023-08-04 – the zigbee temp & humid sensors “cave” and “outside” no longer updating. stuick at some value. transmits, but values never change.
- reboot hass; no better
power cycle sonoff zigbee bridge; no better - power off//on the cave sensor; no better
- battery? measures 3.2, requires 3, so good; try new; no better
- did i kill it by leraving outside? good for -10C, so didn’t get that cold , but was below zero.
pressed the buton on dining room sensor; 5 seconds, then it blinks 3 times red. seems to make it update, since now its readsing
even after 2 hours, no change (there is discussion that the tmep reading is ~1hr intervals unless fast chaning ); reset again; no better.
pressing reset 5 secs on outside sensor does nothing other than flash the led red 3x
2023-08-15 – now the new display unit in the library has locked up values but is still tranmitting? is battry dead?
try to reset
