Project – re-cover back deck kitchen wall

see also: Back deck roof removal – 1st two panels off.
see also: Project – fix kitchen wall, ceiling, and roof leak.

things to do:

• get all insulation out, estimate if we have enough need more, get 2x
• use roof sealing sheet as inner vapour barrier, staple in?
• do we have nailer to drive 2″ nails?
  • air nailer is 18ga, but we seem to have used 16ga in it? ???
• remove remaining vinyl siding, corner pcs
• need to replace window edging? likely cheap
• need to seal around window? what goo?
• change chop saw blade
• confirm chop saw is cutting as accurate 90degrees as possible
• decide: how to do corners.
  • 2″x2″ corner molding is simple, covers corner
  • 1″x2″ flush seems much more difficult
  • 
• decide: how to do nails? exposed or hidden?
• 
• decide: bevel butted edges or not?
• 
• decide: stain or paint – seems like stain is preferred:
• 

Buy:

• OSB sheeting, likely 3pc 7/16″ x 4’x8′? will need trailer?
• shiplap boards x16
• 2x corner trim
• nails (2″? 16ga? 18ga?)
• insulation (one economy pack covers 40sq ft, so with existing rockwool should be enough); get 2, use elsewhere

rough sketch of the surfaces to be covered.

lots of pics from this job…